18V AMPSHARE NIBBLER 1.6MM, BARE – ABLK18-1.6E

Brand:FEINFeatures:Compact nibbler with good behavior in curves for the construction of roofs and facades. Precise cuts in corrugated sheet up to 1.3 mm thick. Includes a charger GAL 1880 CV AS, 1x batteries Li-Ion GBA 18 V 4.0 Ah AS, an additional set of punches and dies, a permanent marker, paint tape and a meter. 216 [66] ft[m] cutting capacity (in 22 [0.8] gauge[mm] thick sheet) with battery charge (4 Ah). Adjustable cutting direction in 45 steps thanks to the matrix that can be adjusted without tools. Optimum handling thanks to the ultra-compact gear case. Cutting speed of 1.5 m/min for extremely fast work. Variable cutting speed thanks to electronic stroke control. Cut on a short overlap area up to 2.6 mm thick. Circular punch increases service life by 30%. Proven MultiMaster motor with exceptional power and strength. Compatible with 18V AMPShare/Bosch Professional batteries. Maximum working speed with 18 V AMPShare batteries: COOLPACK 2.0 technology ensures a longer life compared to batteries without COOLPACK technology and thus allows longer use times. ECP protects the battery from overcharging, overheating and deep discharge. Low operating costs. Punch and die are replaced separately. QuickIN die and punch quick change system. Perfectly equipped for every use. Mobile working with L-BOXX. Advanced cellular technology and intelligent battery management deliver 87% more power than conventional batteries.Specifications:Battery voltage: 18 VBattery compatibility: Lithium-ion/lithium-ion COREBattery interface: 18 V AMPShareNumber of races: 850 – 1 350 1/minCutting speed: 5 [1.5] ft/min[m/min]Steel up to 400 N/mm: 1/16 [1.6] in[mm]Steel up to 600 N/mm: 3/64 [1] in[mm]Steel up to 800 N/mm: 1/32 [0.7] in[mm]Non-ferrous metals up to 250 N/mm: 3/32 [2.5] in[mm]Cutting width:3/16 [5] in[mm] insert with matrix:7/8 [22] in[mm]Minimum radius (int./ext.): 1-1/4 [30] / 1-1/2 [35] in[mm]Weight without battery: 3.77 [1.71] lbs[kg]